Boeing 777 Communications Boeing 777 Communications 1 / 15 Wich of the following is NOT an example of an ATC REQUESTED REPORT that can be armed for automatic downlink to ATC? LEVEL 330. PASSING SEA. MAINTAINING FL330. LEAVING FL330. 2 / 15 What can the First Officer do to regain audio control if his audio control panel fails? Position the OBS AUDIO selector to F/O, then use the First Officer's audio control panel. Position The OBS AUDIO selector to CAPT, then use the CAPTAIN's audio control panel. Position the OBS AUDIO selector to F/O for at least 1second, then back to NORM, and use the First Officer's audio control panel. Position the OBS AUDIO selector to F/O, then use the Observer's audio control panel. 3 / 15 Which statement about radio tuning is correct? The center radio tuning panel can only be used to tune an HF radio if either the left or right panel fails. HF L can only be tuned by the left radio tuning panel. Any VHF radio can be controlled by any radio tuning panel. The offside tuning light will only appear on the active radio tuning panel. 4 / 15 What happens if you push the CAB transmitter select switch twice within one second?g A pre-recorded message is sent to a pre-selected cabin station. A priority call is placed to a pre-selected cabin station. Nothing. The second push cancels the selection. A conference call is initiated with all cabin stations. 5 / 15 What does an illuminated flight interphone CALL light on the audio control panel indicate? Another airplane is calling. The FLT transmitter select switch is stuck in the ON position. A ground crew technician is calling the flight deck. Someone is calling the flight deck on VHF radio. 6 / 15 A high-low chime sounds and a COMM communications alert message appears on EICAS. What action should you take? Push the FMC COMM function key on the CDU and view the uplinked message. Push the COMM switch on the display select panel and view the uplinked message on the MFD. Push the transmitter select switch with the illuminated CALL light and respond to the call. Push the COMM switch on the display select panel and view the uplinked message in the CDU scratchpad. 7 / 15 What is indicated by a flight deck printer PAPER light? The flight deck printer has failed. The flight deck printer is out of paper or the paper is jammed. The flight deck printer is low. The flight deck printer is turned off. 8 / 15 What does illumination of the offside tuning light mean? The selected VHF radio is inoperative. One of the other radio tuning panels is tuning a radio normally tuned by this panel. The microphone is keyed and transmitting on the selected frequency. You have a call from company. The left radio tuning panel is normally associated with VHF L and HF L. The right radio tuning panel is normally associated with VHF R and HF R. The center radio tuning panel is normally associated with VHF C. 9 / 15 Which of these statements may be true if the offside tuning light is illmunated on the left radio tuning panel? The left radio tuning panel is tuning a radio normally tuned by one of the other tuning panels. The frequency is being transferred from the STANDBY to the ACTIVE window. The left radio tuning panel is inoperative. 10 / 15 What is necessary to converse with the mechanic servicing the engine at the engine nacelle? Position the OBS AUDIO selector to CAPT. Position the SERV INTPH switch to ON. You cannot speak with any of the ground crew except at the nose wheel well. Use the CDU and line select SERVICE INTERPHONE. 11 / 15 What does the SELCAL communication EICAS alert message indicate? An uplink has been received. A VHF or HF selective call has been received and is waiting to be answered. A cabin attendant is calling the flight deck. The selective calling system has failed. 12 / 15 Both HF radios use a common antenna. True. False. When either HF radio is transmitting, the antenna is disconnected from the other HF radio, and it cannot be used to transmit or receive. However, both HF radios can receive simultaneously if neither is being used for transmitting. 13 / 15 When an HF transmitter is keyed after a frequency change the antenna tunes. While the antenna is being tuned, a tone can be heard through the audio system. How much time must be allowed for the antenna to tune? Tuning takes a maximum of 15 seconds. Tuning takes a maximum of 10 seconds. Tuning takes a maximum of 5 seconds. Tuning takes a maximum of 20 seconds. 14 / 15 Which of the following data values does not provide crew feedback, by turning green, when you comply with an ATC uplink message? VHF frequency. VOR frequency. MCP heading. Barometer setting. 15 / 15 What does the EICAS message RADIO TRANSMIT indicate? A VHF or HF radio transmitter is keyed for 30 seconds or more. An incoming HF call requires a response. A radio tuning panel is unserviceable. Radio transmission is disabled during fuelling. Your score is By Wordpress Quiz plugin
Boeing 777 Communications
1 / 15
Wich of the following is NOT an example of an ATC REQUESTED REPORT that can be armed for automatic downlink to ATC?
2 / 15
What can the First Officer do to regain audio control if his audio control panel fails?
3 / 15
Which statement about radio tuning is correct?
4 / 15
What happens if you push the CAB transmitter select switch twice within one second?g
5 / 15
What does an illuminated flight interphone CALL light on the audio control panel indicate?
6 / 15
A high-low chime sounds and a COMM communications alert message appears on EICAS. What action should you take?
7 / 15
What is indicated by a flight deck printer PAPER light?
8 / 15
What does illumination of the offside tuning light mean?
The left radio tuning panel is normally associated with VHF L and HF L. The right radio tuning panel is normally associated with VHF R and HF R. The center radio tuning panel is normally associated with VHF C.
9 / 15
Which of these statements may be true if the offside tuning light is illmunated on the left radio tuning panel?
10 / 15
What is necessary to converse with the mechanic servicing the engine at the engine nacelle?
11 / 15
What does the SELCAL communication EICAS alert message indicate?
12 / 15
Both HF radios use a common antenna.
When either HF radio is transmitting, the antenna is disconnected from the other HF radio, and it cannot be used to transmit or receive. However, both HF radios can receive simultaneously if neither is being used for transmitting.
13 / 15
When an HF transmitter is keyed after a frequency change the antenna tunes. While the antenna is being tuned, a tone can be heard through the audio system. How much time must be allowed for the antenna to tune?
14 / 15
Which of the following data values does not provide crew feedback, by turning green, when you comply with an ATC uplink message?
15 / 15
What does the EICAS message RADIO TRANSMIT indicate?
Your score is
